The Heads of Workplace Safety Authorities (HWSA) Imported Materials with Asbestos Working Group have issued a safety alert regarding asbestos found in acetylene cylinders that have been imported into Australia.
This safety alert provides information about acetylene cylinders with asbestos.
The asbestos identified through tests related to the internal insulation from the acetylene cylinders. The cylinders were supplied by Xinxiang Safety Cylinder Co Ltd in China and the material used was described as Calcium Silicate. The Australian company was advised by the China based supplier that the cylinders were asbestos-free.
Acetylene is a colourless gas which is widely used as a fuel and a chemical building block. It is the hottest of all fuel gases and is used for a number of applications including welding, plastics and acrylic acid derivatives and portable lighting. An acetylene cylinder has a different design from most other gas cylinders. It consists of a steel shell containing a porous mass, with the locations of possible asbestos being located at the neck and base of the cylinder. The acetylene gas in the cylinder is dissolved in acetone which is absorbed by the porous mass. Like other compressed industrial gases, acetylene can be hazardous to the user and for those nearby if not used correctly.
Figure 1: Acetylene cylinder diagram of internal components (graphic courtesy of OSHAcademy)
Managing the risk of asbestos in imported products
While asbestos has been a prohibited product in Australia since December 2003, in many countries it is still used in manufactured products. Certification provided to importers from overseas manufacturers that goods are asbestos-free have sometimes found to be wrong for the purposes of our regulations.
The use of all forms of asbestos has been banned in Australia since the end of 2003. This means that the import, manufacture, supply, sale and use or reuse of asbestos and asbestos-containing products is no longer permitted, except under very limited circumstances.
Local standards in some supplier countries may classify goods ‘asbestos-free’ where they meet a certain low level of asbestos content. In Australia, a product found with any level of asbestos is prohibited for import or use.
Available information indicates that these cylinders do not pose a measurable health risk through normal use.
Consumers should not perform any maintenance, repairs or modifications on these cylinders that may disturb the parts containing asbestos.
If you believe you have one of these cylinders then you should contact the supplier you received it from to arrange to have it returned. A safety data sheet on acetylene is available here.
The importer must ensure they do not import asbestos into Australia.
Importers should be aware of the varying definitions and standards applied in the country of origin and/or supply. Australian regulations apply at the border.
Where acetylene cylinders are considered a risk of containing asbestos, the Australian Border Force will require assurances from the supplier that they do not contain asbestos. A test report from a National Association of Testing Authorities (NATA) accredited laboratory, or equivalent overseas body with a zero asbestos content result would be the best form of assurance. More information can be found on the NATA website. If adequate assurances are not provided, suppliers will face delays and be responsible for costs incurred when the cylinders are held at the border for the purposes of sampling and testing. Importers should be familiar with the asbestos information on the Department of Home Affairs asbestos webpage.
This Alert has been developed by the Heads of Workplace Safety Authorities (HWSA) Imported Materials with Asbestos Working Group, whose membership comprises representatives from: Australian Border Force, Asbestos Safety and Eradication Agency, Comcare, Workplace Health and Safety Queensland, Australian Competition & Consumer Commission, WorkSafe Australian Capital Territory, Department of Home Affairs, Northern Territory WorkSafe, SafeWork SA, WorkSafe Tasmania, Safe Work Australia, WorkSafe Victoria, Safe Work NSW, WorkSafe Western Australia and the Federal Department of Employment.